SEA STORIES

2. Sinking Beer Cans

In the early 1960s I joined Uncle Sam’s Yacht Club and spent four years on active duty. Toward the end of that tour of duty I married Lynne Harley and after I left the Navy we purchased a 31 foot sloop named ESCAPE, but that’s another story. In the meantime Doug purchased the GAMBELLA and began the long process of restoration. To his credit, Doug managed to get her back in the water and functioning again. Lynne and I worked on the ESCAPE and sailed her here and there, mostly within the San Francisco Bay Area. After a couple of years of sailing the ESCAPE we sold it and were without a boat for a while.

About that same time Doug had become somewhat discouraged with the enormous task of restoring the GAMBELLA, and I was missing a nautical element to my life. After some discussion the three of us, Doug, his brother Stan and I decided to form a partnership and continue the GAMBELLA project. We normally spent one day a week (usually Saturday) working on our boat. After a short period of time Stan dropped out of the project, but Doug and I continued on for several years before I bought his share.

Typically, we would meet at the boat Saturday morning with a six-pack of beer. We would have our first beer which we called our “think drink” while planning the day’s work. After working through the morning we would have our second beer with our lunch, and the last beer after finishing up for the day. We used a marlin spike to punch holes in the cans and then tossed them overboard to sink. I liked to think of this as recycling because while going to college I worked summers for W.P. Fuller & Co. in their plant right on the edge of the Bay in South San Francisco. Next door to the plant was another industrial operation that extracted dissolved aluminum from sea water. Doug, on the other hand, being a math major, tried to determine the minimum number of holes and their placement that would be required to insure that the can would always sink.

As fate would have it, Doug and I both ended up working for Matson Navigation Co. in their industrial engineering department, and this gave us the opportunity to plan our Saturday efforts in great detail on company time. Here is the sail plan that we decided upon:

Sail Plan for the GAMBELLA
Sail Plan for the GAMBELLA

(click on image for larger view)

The original rig of the GAMBELLA was probably that of a cutter with bowsprint and double head sails. As rigged by Doug it became a sloop with a single head sail and no bowsprint. However, based on our experience with the LA BAÑERA we decided on a gaff rigged schooner — it’s such a salty rig. The existing mainmast was shortened and moved aft and a new foremast was stepped where the main had been. The following pictures should give an inkling of the scope of work involved in the refit:

(click on images for larger view)

Stepping the Mainmast

Doug Guides the Stepping of the Mainmast

Making Sails

Making Sails

Annual Haul Out

Annual Haul Out

Installing Rebuilt Motor

Installing the Rebuilt Motor

Dad and Deeds Paint the New Bow Sprint

Dad and Deeds Paint the New Bow Sprint

Grinding Rust

Grinding Rust

Patching the Hull

Patching the Hull

Lynne Applies Primer

Lynne Applies Primer

Work Work Work

Work Work Work


Tags: ,

Sunday, November 15th, 2009 GAMBELLA No Comments

3. Hither, . . .

As indicated in the previous post, by the mid-seventies the refitting of the GAMBELLA was pretty much complete, and at that point we started sailing more while work tapered off somewhat. Initially, we poked into all the nooks and crannies of the South Bay. There are some interesting historical aspects to that general area, and also some sights that can only be appreciated or, at least, are best appreciated by boat. It should be noted, however, that getting to most of them requires close attention to the tides. Typically, an exploration must begin on a flood tide and end on an ebb tide. This will provide six to eight hours of sailing time. An alternative is to spend eight to twelve hours at the destination and return on the following tide. If you don’t follow this schedule you will probably end up stranded on the mud flats for hours. The tidal range in the South Bay is six to eight feet, about twice what it is at the Golden Gate Bridge. Consequently, at high tide there is plenty of water for sailing, whereas there are miles of mud flats at low tide. So, when studying the chart below, it should be noted that almost all of the area that is colored light green is sailable at high tide.

The earliest literary reference  I have found to the South Bay is in the book,  Two Years Before the Mast, by Richard Henry Dana. Dana was a student at Harvard when he contracted a severe case of measles which adversely effected his general health. His doctor recommended a sea voyage to aid his recovery. So Dana signed on as a deck hand in a vessel that was engaged in the hide trade up and down the coast of California. That was around the year 1835, and his written account of this experience was the only book available in English that contained detailed descriptions of California at the time of gold rush. Consequently, he became rather famous and there are many places in California that now bear the name of Dana as a result.

Dana’s book includes an account of rowing down the bay in long boats to the missions of San Jose and Santa Clara to collect hides. It is most likely that the route to Mission Santa Clara was by way of Guadalupe Slough and the way to Mission San Jose was Alviso Slough (see points 4 & 6 on chart below). In the late 1970s I was up  Guadalupe slough several times as far as a small fuel dock used for unloading barges laden with jet fuel bound for Moffett Field Naval Air Station. It was a great place to watch an air show, and thus avoid the traffic and crowds. Also, if correctly timed with respect to the tides, you could occasionally leave Palo  Alto on a flood tide, run down the bay and up Alviso Slough to the town of Alviso, have dinner at a fine Italian restaurant, sail back up the bay on an ebb tide, and be in your berth before you ran out of water.

Southern San Fracisco Bay
Southern San Fracisco Bay

(click on image for larger view)

Points of interest:

(1) Palo Alto Yacht Harbor

(2) Old location of the  Palo Alto Boat Works

(3) New location of The Palo Alto Boat Works

(4) Guadalupe Slough

(5) Newark Slough

(6) Alviso Slough

(7) Oyster shed remains

(8) Abandoned duck club

In another historical reference to the South Bay, Jack London mentions “oyster pirates” in several of his fictional works. In the late 1800s large corporate interests were raising oysters in the South Bay. When harvested, the oysters were dredged up off bottom and stored temporarily in oyster sheds which were on pilings in the off shore shallow waters. The pirates would come down the bay on a flood tide at night, rob the sheds, and then retreat north on the ebb tide. A young Jack London apparently took part in this venture in a boat he owned called the RAZZLE DAZZLE. When I first started sailing on the the South Bay, circa 1960, some of the pilings that had supported these sheds were still visible at low tide (see point 7 on the chart above).

Palo Alto Yacht Harbor at Sunset
Palo Alto Yacht Harbor at Sunset

(click on images for larger view)

Palo Alto Yacht Harbor was always home base in those days (see point 1 on the chart above), but there were several nearby spots that were popular for overnight getaways. Almost directly across the bay were Newark Slough and Mowry Slough, both of which were near the Leslie Salt processing plant, but in spite of this they seemed very remote from civilization (see points 5 & 8 on chart above).

GAMBELLA I

GAMBELLA

GAMBELLA II

GAMBELLA

On one occasion I was up Mowry Slough by myself for an overnight, and an exploration of the abandoned duck club that is some distance up the slough. The Slough is quite narrow there so I put out anchors both fore and aft to keep the boat aligned  with what water remained at low tide. In the morning as I was preparing to leave, I pulled up the forward anchor and then backed under power to lift the stern anchor, and in the process I backed over the stern anchor line and wound it around the prop. After saying a few naughty words under my breath I went forward and reset the bow anchor. After that I sat in the cockpit for a few moments trying to decide what to do.

Mowry Slough is so situated that going up the Slough is almost  directly down wind and conversely coming out of the Slough is almost directly up wind. Getting out of there without power was a very daunting task, and it seemed apparent to me that I was going to need the engine. There was only one thing to do; I stripped down and went overboard to try and free the stern anchor line from the prop. The water was so muddy that I couldn’t see anything and had to do the whole operation with only my sense of touch. After coming up for air a few times I did mange to get the whole mess untangled. I climbed back aboard, cleaned up and started the engine. However, when I put her in gear nothing happened. This time I said the naughty words out loud. Apparently, this little mishap had broken the drive shaft. Again, I sat in the cockpit for a while trying to decide what to do next.

It seemed obvious that I was going to have to sail her out of there, but by now it was too late as the tide was already too far gone, making maneuvering in the slough impossible. That meant about another twelve hours while I waited for the next high tide. It gave me plenty of time to think about just how I would go about doing this. A gaff rigged schooner is quite a handful for a single person to handle under the best of conditions. There are three sails, five halyards and three sheets that have to be tended to, and on top of that, in this instance, I also had to raise the bow anchor at the same time I was getting underway. But I had twelve hours to plan my every move in detail.

I also had my art supplies with me so, to pass the time, I did an ink wash rendering of the abandoned duck club. The club house was abandoned in 1968 when legislation created the San Francisco Bay National Wildlife Refuge. You could wander through the collapsing shacks in the 1970s and still see clothes hanging on wall hooks and cans of food on the shelves. Swallows had moved in and made themselves at home and everything was covered with their droppings.  You may see my rendering (as an etching) of that site by clicking here.

Come the next high tide I had all my moves thoroughly choreographed in my mind. I hoisted all the sails, raised the anchor, then dashed aft to man the tiller. I tacked a whole series of short reaches and I did manage to sail her out of there, cross the bay and and enter my own slip all under sail, a feat of seamanship I still feel rather proud of today.

Secure in my own home berth I decided to open up the engine room and crawl back there to see the extent of the bad news. To my surprise the shaft was not broken, it had simply been pulled out of the spline at the back of the transmission. It was a relatively easy thing to fix, one that could have been done on the spot had I not assumed the worst.

Tags: , , ,

Friday, November 6th, 2009 GAMBELLA No Comments

1. The Early History

GAMBELLA: I believe this an Italian idiomatic expression that literally translates to “pretty legs” but in a nautical context means “good lines.”

The first time I saw the GAMBELLA she looked like the photo below — a total derelict. She looked horrible but on closer examination one could see that she was a strong boat and well founded. She was built of steel and her history was interesting. As I remember she was built by two brothers both of whom were shipwrights. Construction began on the Clyde River in Scotland before WWII; however, the war interrupted their efforts and the GAMBELLA had to wait for it to end before construction resumed. The hull was riveted and the ballast was a collection of steel scrap mixed with concrete and internal to the hull. My knowledge of her early history is sketchy, but as I remember she was sailed from Scotland to Singapore via the Panama Canal.
The Derelict GAMBELLA
The Derelict GAMBELLA

Apparently she spent some time in Singapore and was a member of the Royal Singapore Yacht Club. If you look closely at the photo you can see that letters RSYC are still posted on the after buklhead of the cabin. I believe, while in Singapore, the dog house was added. It is made of teak and of entirely different construction than the rest of the boat. Also, somewhere along the line, the capability for inside steering was added in addition to a larger more powerful engine. At that point she essentially became a small motorsailer.

As I remember she was then sailed to Guam, but I don’t know how long she was there. Eventually, she was shipped aboard a freighter to the San Francisco Bay Area. I did hear a story from the owner of the Palo Alto Boat Works that at some point she hit a snag and sank in the shallow water of the South Bay. She was apparently raised and repaired from that adventure, but finally ended up in the old Palo Alto Boat Works where the picture above shows her. That picture dates to about 1961. About that time my buddy Doug, his brother Stan and I owned an old converted lifeboat which we called LA BAÑERA (The Bath Tub). We used to haul out at the old Palo Alto Boat Works right next to where the GAMBELLA was slowly rusting away, and this gave us the opportunity to give her a close look.

Here is what she looked like in the mid-seventies when restoration was more or less compete:

GAMBELLA Sublime

GAMBELLA Sublime

The next post will attempt to give a sense of what it took to transform the GAMBELLA from a derelict to the condition shown above.


Tags: , ,

Monday, October 26th, 2009 GAMBELLA No Comments
 

Categories

Meta